TIMKEN 501310 bearing Size Chart (mm/inches) |
|---|
| Bearing (basic designation) | 23234 |
| Locating ring | 2 x FRB 6/310 |
| da | 170 mm |
| db | 190 mm |
| Ca | 122 mm |
| Da | 310 mm |
| A | 260 mm |
| A1 | 210 mm |
| ATS | 270 mm |
| H | 375 mm |
| H1 | 190 mm |
| H2 | 80 mm |
| J | 480 mm |
| J1 | 120 mm |
| L | 560 mm |
| N | 34 mm |
| N1 | 28 mm |
| s | 10 mm |
| ba min. | 78 mm |
| ba max. | 112 mm |
| bb | 73 mm |
| bc | 117.5 mm |
| J6 | 520 mm |
| N4 max. | 20 mm |
| Labyrinth seal | 2 x TS 40/190 |
| End cover | ETS 40 |
| P0° | 2200 kN |
| P55° | 2700 kN |
| P90° | 1300 kN |
| P120° | 1000 kN |
| P150° | 880 kN |
| P180° | 1100 kN |
| Pa | 710 kN |
| Q120° | 1800 kN |
| Q150° | 1040 kN |
| Q180° | 900 kN |
| Mass housing | 97.5 kg |
| Cap bolt, size | M 24x150 |
| Cap bolt, rec. tightening torque | 350 N·m |
| Appropriate attachment bolt, size G | 24 mm |
| Appropriate attachment bolt, rec. tightening torque | 665 N·m |
| Eye bolt, size | 2 x M 20 |
| Initial grease fill, 20% | 1.2 kg |
| Initial grease fill, 40% | 1.9 kg |